Skip to main content

John Wise, London. Long-case clock decorated in All-Over Marquetry example. Late 17th-century. FFF-15.

 

This fine case, standing about 90 inches tall and 19.5 inches wide, is a striking example of excellent proportions. It is constructed of oak and veneered with richly figured walnut, with complex inlays. This dramatic decoration was popular in London from 1690 to about 1700, particularly in long-case design. Individual pieces of wood veneer, often colored, are arranged in decorative patterns. This example features numerous floral patterns, including chrysanthemums, carnations, and tulips. Two of the three door panels depict birds and winged mythological figures. Long vine patterns provide borders. All are laid out on the case's forward-facing surfaces. Note the uneven surface caused by shifting of the oak substructure and the veneer's shrinkage, a sign that this case is aged and not a reproduction. This clock is a masterpiece of craftsmanship, made circa 1690.

This fine example stands flat on a double-stepped applied molding. The base is somewhat compressed compared with later long-case clocks. An ogee molding transitions the base into the waist section. The waist is long and narrow, highlighting the case's excellent proportions. The waist door is large and fills the waist section. It is trimmed with applied rounded molding and features a circular cutout in the center. A rounded, gilded wooden ring trims this opening, and it is fitted with glass. This window, almost 4 inches in diameter, is called a "lenticle." Its purpose is to allow viewing of the brass-faced pendulum bob without opening the door. It also shows the clock has a long pendulum, a new technology at the time. The case sides are decoratively finished. They are horizontally veneered in walnut and feature line-inlaid panels, a tradition of many London cabinetmakers. The bonnet has a fully developed caddy-top decorated with floral inlays. Two finial plinths are positioned on the sides of the caddy, each supporting a gilt wooden ball-and-spire finial. Below this is a boldly formed hood molding and a section of blind fretwork. Large rectangular openings with glass panels flank the hood. Doric columns are mounted directly to the squared hood door. These, along with quarter Doric columns at the back of the hood, end in gilt wooden capitals and bases.

The eleven-inch-square dial is brass and features decorative details, both engraved and applied. Heavily cast cherub-head spandrels frame the raised silvered chapter ring. They are positioned in the four corners. The applied time is finished in a silver wash. It is decorated with engravings including an interior segmented minute ring, Roman-style hour numerals, sword-hilt half-hour markers, and a separate segmented minute ring outside the hours with Arabic five-minute positions and half-quarter arrowheads. It is signed on either side of VI o’clock, John Wise, London. The dial center is finely matted. The seconds ring and calendar are also silvered. The winding and second holes are decorated with ring turnings; the square date aperture window is chamfered and surrounded by an engraved detail. The finely formed steel hands display the time.

This weight-driven movement is made of brass. Five knob-and-finned posts support the two large rectangular brass plates. Steel shafts support the brass gearing. Both winding barrels are grooved. The movement is designed to run for eight days on a full wind. The escapement is a recoil design and features a seconds-length pendulum. The strike train is governed by a countwheel mounted behind the backplate. Each hour is struck on a large cast iron bell mounted on a stand above the movement. The works are of excellent construction. Its survival today in excellent working order proves this.

This clock was made circa 1695. It stands about 90 inches tall to the top of the center finial. At the upper hood molding, the largest part of the case, it measures approximately 19.5 inches wide and 10.5 inches deep.

In Brian Loomes' Clockmakers of Britain 1286 -1700, John Wise (II) is listed as being born in 1658 at Wadwick, the son of John Wise (I) (1624-1690), who was a cousin of Joseph Knibb, John Knibb, and Samuel Knibb. In January 1665, John began an apprenticeship with his father, which lasted until 1682; he was freed in April 1683. In 1697, he signed the oath of allegiance to the Clockmaker's Company. He trained several apprentices. His death date is not currently known. He had a child born in 1700.

Inventory number FFF-15.

 

For more information about this clock click here.
  • John Wise Long-case clock decorated in All-Over Marquetry example. Late 17th-century. FFF-15.
  • John Wise tall clock decorated in All-Over Marquetry example. Late 17th-century. FFF-15.
  • John Wise clock dial. Late 17th-century, London. FFF-15.
  • John Wise London. FFF-15.