Skip to main content

E. Howard & Co. No. 28. Marble Dial Clock. Boston, MA. 221136.

Marble Dial Clocks were originally designed for and used in banks, halls, public buildings, hotels, railway depots, church galleries, and all large apartments. Marble was used as a material and accepted by the public because of its distinctive look. The surface of these clocks is easy to keep clean and are very durable. 

The entire front of this case is a single piece of marble measuring approximately one-half an inch thick and 2 feet 4 inches long. The marble selected for this example features an active grain pattern. The stone is trimmed with a nicely formed edge and is in very good condition. It is not cracked or chipped. The marble is mounted with two large screws at 3 and 9 o'clock. These pass through holes in the marble and the stone to the pine case behind it. The form of the wooden case follows the shaping of the marble. The outside surfaces of the wooden case are painted white. This is an original painted surface. The 14-inch diameter dial is in the upper section of the marble. It features Roman-style hour numerals and a closed minute ring. The Clockmaker's signature is painted in red. The painting in this example has been strengthened. The time is indicated on the front of the clock with the two decoratively formed hands. The motion of the pendulum can be viewed through the clear aperture in the center of the paint-decorated lower tablet. This original tablet is painted from the back and features the traditional colors of black and gold. Also, note the two decorative stars in the design. This tablet is mounted in the shaped opening located in the lower section of the marble/facade. 

The weight-driven movement is brass and of very good quality. The weight is cast in lead and is original to this clock. The Maker's name and working location are die-stamped onto the heavily cast front plate. Both rectangular-shaped plates retain their original scraping design. This movement is also fitted with a Geneva stop-work winding mechanism. The pendulum is supported by a block mounted above the movement's plates. An auxiliary steel rod extends to the top of the case to fine-tune the time regulation. This is done by turning the knob at the top of the case. The pendulum rod is made of wood and retains its original gilding. The bob is zinc, covered in brass, and retains a bold engine-turned design in alternating concentric rings. This is a pleasing design. The motion of this pendulum bob can be viewed through the glass tablet in the lower section of this clock. There is also a device that will start the pendulum located at the bottom of the case. Push this level side to side, and it, in turn, engages the pendulum rod to start the clock.

This fine clock was made circa 1875. 

Inventory number 223086.

 

The E. Howard & Company represents a significant chapter in American horological history, continuing the legacy of the esteemed Howard & Davis firm after 1857. Established in 1842 in Roxbury, Massachusetts, Howard & Davis was the brainchild of Edward Howard and David Porter Davis, both of whom trained under the legendary Aaron Willard Jr. Their early work set new standards for precision timekeeping and craftsmanship in 19th-century America. The firm’s innovations extended beyond clocks to include balances, sewing machines, fire engines, and watches—demonstrating a remarkable breadth of technical achievement. By 1852, their manufactory was a landmark in Roxbury, as seen on period maps. Following the dissolution of Howard & Davis, Edward Howard’s vision propelled him to become Boston’s leading maker of weight-driven clocks, catering to both residential and commercial needs. Notably, the company played a pivotal role in shaping the landscape of American tower clocks and advanced timekeeping systems during the late 1800s, contributing to the growing network of public and institutional clocks across the country. The completion of a new factory complex in 1873 further cemented their influence, with separate facilities for clocks and watches reflecting the scale and ambition of their operations.

The legacy of the E. Howard Clock Company endures as one of the most respected in American horology. Renowned for its unwavering commitment to quality and innovation, the company never produced an inexpensive clock; instead, it set benchmarks for accuracy, durability, and elegance. Its clocks became the standard in schools, public buildings, and railway stations across the country, marking significant moments in the nation’s growth. Collectors and institutions alike prize Howard clocks for their superior craftsmanship and historical importance. Today, the E. Howard name remains synonymous with exceptional quality, technical achievement, and an enduring influence on the art and science of clockmaking.

 

  • E. Howard & Co., No. 28. Marble Dial Clock. Boston, MA. 221136.