Aaron Willard of Boston, Massachusetts. A long case clock.
This is an important inlaid mahogany case tall clock made by Aaron Willard of Boston, Massachusetts.
This is a classic Roxbury example. This case exhibits excellent proportions constructed by the Roxbury school of cabinetmakers. This case measures approximately 100 inches or 8 feet 2 inches tall to the top of the center finial. The dial measures the standard 12 inches across.
This mahogany case is in excellent condition. The case stands on four nicely formed ogee bracket feet. These are applied the bottom of the double step molding. This molding is applied to the base. The base panel features vertical graining. The long tombstone waist door is fitted with an applied molding that frames the outside edge. One would open this door in order to gain access to the inside of the case where the wooden rod pendulum and iron weights are located. The sides of the case are fitted with the traditionally formatted brass stop fluted quarter columns. These terminate in brass quarter capitals. The bonnet features a pierced and open fret work design which is original to this example and is surmounted with three large brass ball and spiked finials. These finials are supported on line inlaid and capped plinths. Fully turned and brass stop fluted bonnet columns support the upper bonnet molding. They are mounted in brass capitals and are free standing. The arched bonnet door is fitted with glass and opens to access the painted iron dial. that is trimmed with a brass boarder.
This iron dial is colorfully painted decorated. The four spandrel areas are decorated with interesting floral themes. A lunar calendar or moon phase mechanism is located in the arch of this dial. This dial also displays the hours, minutes, seconds and calendar date in the traditional format. This dial is signed by the Clock maker in large block lettering. This signature is located below the calendar date above the Roman hour numeral six. The signature simply reads, “Aaron Willard.”
This movement is constructed in brass and is good quality. It is weight driven and designed to run eight days on a full wind. It is a time and strike design having a rack and snail striking system. As a result, it will strike each hour on the hour. This is done on a cast iron bell which is mounted above the movement.
This beautiful clock was made circa 1795. It stands approximately 100 inches tall to the top of the center finial.
About Aaron Willard of Grafton, Roxbury and Boston, Massachusetts.
Aaron Willard was born in Grafton, Massachusetts on October 13th, 1757. Little is known of his early life in Grafton. It is here that he probably learned the skill of clock making from his older brothers Benjamin and Simon. It is recorded that he did march with them in response to the Lexington Alarm on April 19,1775. In 1780, Aaron moved from Grafton to Roxbury along with his brother Simon. Here the two Willard brothers establish a reputation for themselves as fine clock manufactures. They were both responsible for training a large number of apprentices, many of which became famous clock makers in their own right. The Willards dominated the clock making industry in the Boston area during the first half of the nineteenth century. Aaron worked in a separate location in Roxbury from his brother and relocated about a quarter mile away from Simon’s shop across the Boston line about 1792. Aaron is listed in the 1798 Boston directory as a clock maker ‘on the Neck’ and his large shop employed up to 30 people, while 21 other clock makers, cabinetmakers, dial and ornamental painters and gilders worked within a quarter-mile radius by 1807. We have owned a large number of tall case clocks made by this important Maker. In addition, we have also owned a good number of wall timepieces in the form of banjo clocks as well as numerous Massachusetts shelf clock forms.
For more information about this clock click here .